It is a reality that drawer computers tend to give off a lot of heat due to the intense work that their components may have. Thanks to this, the cooling with fans has raised the level, to the point of necessary use of liquids. In this case, cooling of this type tends to be much more useful and effective in preventing damage of some kind.
Now that you know this, you are surely interested in having liquid cooling for your gaming drawer computer. If so, enjoy this article where Go Clickonit Store will give you everything you need to know about this type of ventilation. Always protect your computer!
What is Liquid Cooling PC?
When we talk about liquid cooling, we refer to one of the current computer cooling methods. This is based on the use of liquids, usually water, to carry the components' heat to a cooling place. It should note that it is not that the water should come into contact with the various components in the computer drawer.
The components will have contact with a cooling plate or sink thanks to the flow of the water. In this way, the heat released from them is transported through that same flow to cool down. That is why different computers have become such an efficient and widely used method today.
This cooling method has two tubes, through which the liquid enters or leaves. The one that enters all the collected heat is passed through a cooling radiator and then leaves through the other. In this way, it is maintained in a constant flow of input and output that allows everything to be at a good temperature.
Characteristics and varieties of Liquid Cooling PC
As we already mentioned, these liquid cooling PC work under a closed circuit in constant movement. This pumping system seeks to maintain the continuous cycle of cold - hot - cold held stably.
Generally, water is the main liquid, accompanied by added additives. In addition to this, it has a biocide that helps prevent the production of fungi or dirt that often occurs. On the other hand, some ultraviolet dyes can also give light effects and components that prevent oxidation.
The truth is that these cooling methods have a wide variety of systems on the market. Some have heat output to the outside with heatsinks; others have CPU or GPU mounts and even gaskets. The Hace brand often relies on the more reputable Cooler Master for its Predator line.
Why is it used in gaming computers mainly?
It is not a secret that a normal desktop or laptop computer tends to give off heat from its components. In the case of a gaming desktop, the performance of its components is greater, giving off more heat. Even though graphics cards are willing to work with fans or heatsinks, their temperature is still high.
That is why adding one of these cooling systems offers many advantages in this regard. Also, if you have a drawer with little space, the heat will concentrate in a greater proportion, so it is recommended to change it. The liquid cooling system becomes key to saving the computer's components.
It should note that these types of installations can currently only be done on desktop computers. It occurs because the components of this cooling system need space to work properly. This space is unavailable for laptops, although this is expected to change soon.
Can there be leaks in the liquid cooling method?
You may be wondering if there are risks to having liquids inside the computer drawer or if there may be leaks. It is a reality that can happen, and everything will depend on how this system is installed. It is safe if done correctly. Otherwise, you can have big failures.
It may depend on the type of system you have installed, be it AIO or Custom. The components and the assemblies are different, so that leaks can exist for various reasons.
If you have an AIO system installation, each piece is accompanied by another reliable system. However, in practice, it can leave some deficiencies that lead to failures due to:
- Bad assembly on the computer
- Defective components
- Entry of micro dust or presence of capillarity
All this can lead to big problems that affect the correct way in which they should work. On the other hand, the factors can be greater when you have a Custom type system. These assemblies are usually custom, so failures such as:
- A system not designed correctly and poorly executed
- O-rings that are pinched
- A lot of pressure on components such as Acrylic or Plexi
- Poor fit fittings
- Bad assembly or that the unions, extenders or elbows are not tightened correctly.
- The tightest pumps
Components of this cooling system
Now that we know everything that surrounds the liquid cooling system better, it is time to see its components. Everything that integrates it can work correctly once installed on the computer.
Cooling plate
It is the one that is in charge of having the heatsink, aluminium or copper, that goes directly to connect with the CPU. It is heat-conducting, and inside, it circulates all the water to be cooled while it is in constant flow.
The bomb
A component that works just like the pumps installed in other systems. Its mission is to supply the pressure that is needed so that the liquid remains in its constant course.
The liquid that is responsible for cooling
It is the fluid that will transport all the thermal energy produced by the computer's components. Its composition varies according to your brands, with ethylene glycol being a common point. It is a chemical component often used for antifreeze and has a decorative colour.
The radiator
Some fans are attached to this type of aluminum element. Inside it circulates all the coolant to cool through its blades. All the temperature is processed to decrease and expel the much colder liquid. In this way, the computer drawer will receive a suitable temperature again.
Tubes and sleeves
All the tubes used within this aspect, whether they are polyvinyl chloride or another plastic derivative. All the liquid used as a refrigerant in the system will circulate through these elements. Some may be flexible, while others have a much more rigid and complicated system to install, although they are more durable.
fans
As we already mentioned, these are attached to the radiator to displace the necessary air that allows the temperature change. If they reach a high speed, they can be more efficient when eliminating the heat that ends up being produced.
These are the main elements usually found in all the installations of these systems. Some can be much more personalized where different colours are used in the coolant. Instead, others prefer to add LED lights to enhance the aspects of the computer drawer.
Now that you know all the features and work that liquid cooling does, it's time to install it. It will be of great help if you are a user who enjoys having video games on your computer, and it gives off a lot of heat. In addition, this will allow you to keep all your components safe and extend the useful life of your computer.
Take your computer to another level with liquid cooling.
With the customization and installation of liquid cooling, your computer will work in a better way at the component level. Each of them will be able to develop in a better way, allowing you to work and play at high speed. Also, remember that you must apply the proper care and maintenance so that accidents do not occur.
0 Comments